SBC Stuck In Boot Loop Due To Faulty Hard Drive

Asset ID:	1-72-2347286.1
Update Date:	2018-04-30
Keywords:

Solution Type Problem Resolution Sure

Solution 2347286.1 : SBC Stuck In Boot Loop Due To Faulty Hard Drive

Applies to:

Acme Packet 4500 - Version S-Cx6.2.0 to S-Cz7.4.0 [Release S-Cx6.0 to S-Cz7.0]
Acme Packet 3820 - Version S-Cx6.2.0 to S-Cz7.4.0 [Release S-Cx6.0 to S-Cz7.0]
Information in this document applies to any platform.

Symptoms

An SBC with a hard drive is stuck in a boot loop with the following messages displayed on the console:

[3]FAT-fs (sda2): FAT read failed (blocknr 9944)
end_request: I/O error, dev sda, sector 781436825
FAT-fs (sda2): FAT read failed (blocknr 1783ndled error code
end_request: I/O error, dev sda, sector 781436825
FAT-fs (sda2): FAT read failed (blocknr 17837)
end_request: I/O error, dev sda, sector 781 read failed (blocknr 17837)
end_request: I/O error, dev sda, sector 781428932
FAT-fs (sda2): FAT read failed (blocknr 9944)
end_request: I/O error, dev sdas (sda2): FAT read failed (blocknr 9944)
end_request: I/O error, dev sda, sector 781436825
FAT-fs (sda2): FAT read failed (blocknr 17837)
end_request: I/O er25

Changes

Cause

Failed hard drive

Solution

The hard drive should be replaced in this situation.

Attachments

This solution has no attachment