Acme Packet 4500
 

PLA-Support>Sun Systems>CommsGBU>Session Delivery Network>SN-SND: Acme Service Provider
 

SBC is not managing media properly on 7.2 and above
mm-in-realm/mm-in-network parameter act different in 6.3.0 vs 7.2.0

In this Document

Symptoms

Changes

Cause

Solution

References

Created from <SR 3-13345479281>

Applies to:

Symptoms

MM-in-realm/mm-in-network parameter act different in 6.3.0 vs 7.2.0/7.3.0

Normally, Customer wants media to be released for calls in the same access realm. 

To achieve this they have mm-in-realm and mm-in-network disabled in the realm configuration.

In some cases where they want to manage media they will enable mm-in-realm and keep mm-in-network disabled.

This used to work perfectly on 6.3.

But in release 7.2, in the same situation, putting mm-in-realm to enabled is not
enough. They have to configure also mm-in-network enabled, in order to have
the media managed by the SBC.
All the other mm parameters are always enabled.

Changes

 Upgrade from 6.3 to 7.2/7.3

Cause

 This is a bug and code needs to be changed.

Reference Bug# 24702886 - mm-in-realm/mm-in-network parameter act different in 6.3.0 vs 7.2.0

Solution

This issue is resolved in SCZ730m2p3 and later

References

This solution has no attachment