ES2-64 Switch did not come up after a Power Cycle

Asset ID:	1-72-2323743.1
Update Date:	2017-11-01
Keywords:

Solution Type Problem Resolution Sure

Solution 2323743.1 : ES2-64 Switch did not come up after a Power Cycle

Applies to:

Oracle Ethernet Switch ES2-64 - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

ES2-64 switch did not come up after a power cycle.

Cause

ILOM POWER settings not configured .

-> show /SP/policy/
/SP/policy
Targets:
Properties:
HOST_AUTO_POWER_ON = disabled<---------------------------------------Disabled
HOST_LAST_POWER_STATE = disabled

Solution

Configure ILOM as described in the ES2-64 Product notes.

Set 'HOST_AUTO_POWER_ON' to 'enabled'
-> show /SP/policy/
/SP/policy
Targets:
Properties:
HOST_AUTO_POWER_ON = enabled<----------------------------Enabled
HOST_LAST_POWER_STATE = disabled

Confirm by doing a power cycle on the switch again by removing and reinserting AC power cables.

If the issue persists, open an SR with Oracle.

Attachments

This solution has no attachment