T10000C - FSC_2B31 SNO With Code Level 3.62.112 and 3.63.101 - Other T10000 Drive Types Are Not Affected

Asset ID:	1-72-2300826.1
Update Date:	2017-09-06
Keywords:

Solution Type Problem Resolution Sure

Solution 2300826.1 : T10000C - FSC_2B31 SNO With Code Level 3.62.112 and 3.63.101 - Other T10000 Drive Types Are Not Affected

Related Items


StorageTek T10000C Tape Drive

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK T-Series Drive

In this Document

Symptoms

Changes

Cause

Solution

References

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for service personnel
Created from <SR 3-15166098935>

Applies to:

StorageTek T10000C Tape Drive - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Symptoms

T10000C FSC_2B31 SNO with multiple drives. Code level 3.62.112 and 3.63.101 are affected. This article is just for T10000C drive. Other T10000 drives are not affected.

Changes

N/A

Cause

Code inspection has found an issue with how the FCP interface code is cleaning up all of the Verify command status flags during Abort processing.
It is believed that not cleaning up properly after the Abort is causing a subsequent Verify command to fail because it is reacting to bad left over status information.

Solution

Bug 26391408 - T10KC FSC_2B31 SNO with multiple drives.

Issue resolved with this firmware version:

Product Version Release_Date Customer_Installable Patch_ID
T10000C 3.64.101 08/22/2017 Yes 26639034

References

<BUG:26391408> - T10KC FSC_2B31 SNO WITH MULTIPLE DRIVES

Attachments

This solution has no attachment