FTA PURGE Error : File in Use

Asset ID:	1-72-2216582.1
Update Date:	2017-06-29
Keywords:

Solution Type Problem Resolution Sure

Solution 2216582.1 : FTA PURGE Error : File in Use

Applies to:

Oracle Communications EAGLE (Software) - Version EAGLE 45.0 and later
Information in this document applies to any platform.

Symptoms

The seculog cannot be uploaded as required by the UAM.
The following error is shown:

> rept-stat-trbl

0028.0175 * SECULOG 1114 LOGBUFROVFL-SECULOG - upload required
0009.0176 * SECULOG 1116 Stdby security log -- upload required

> dlt-fta:all=yes:loc=1114

   eaglestp 16-12-19 13:57:39 EAGLE5 44.0.2-64.34.16
   Command Failed - FTA Error
   FTA PURGE Error : File in Use

> dlt-fta:all=yes:loc=1116

   eaglestp 16-12-19 13:57:44 EAGLE5 44.0.2-64.34.16
   Command Failed - FTA Error
   FTA PURGE Error : File in Use

Cause

For some reason, the files are still in use when the commands dlt-fta are run.

The command dt-fta has been entered twice on 2 different days, and still the same error message is shown.
The system is maybe getting stuck in this routine, it should not happen like that

Solution

Usie the "force" parameter when entering the commands.

> dlt-fta:all=yes:loc=1116:FORCE=YES

eaglestp 16-12-21 06:29:05 EAGLE5 44.0.2-64.34.16
  All files deleted from File Transfer Area on fixed disk 1116
;

> copy-seculog

  eaglestp 16-12-21 06:29:24 EAGLE5 44.0.2-64.34.16
  Security log on TDM 1114 copied to file 161221a.log on TDM 1114
;
> copy-seculog:slog=act:dloc=stb

Command Accepted - Processing

Attachments

This solution has no attachment