SL150 - CHECK 9151, ROBOT_Z_LOCATE_SNSR_ALWAYS_OFF_EXP_MODULE

Asset ID:	1-72-2204470.1
Update Date:	2017-12-19
Keywords:

Solution Type Problem Resolution Sure

Solution 2204470.1 : SL150 - CHECK 9151, ROBOT_Z_LOCATE_SNSR_ALWAYS_OFF_EXP_MODULE_6

Applies to:

StorageTek SL150 Modular Tape Library - Version All Versions and later
Information in this document applies to any platform.

Symptoms

Error 9151 after Reset of SL150 during initialization and unable to generate Service Logs from SL150.

Messagem error

2016-11-07T13:19:49.107,9151,ROBOT_Z_LOCATE_SNSR_ALWAYS_OFF_EXP_MODULE_6,1,Module 1 Chassis,,,,,,,,,Check module 7 (expansion module 6) locate sensor, always blocked. Inspect/replace chassis.
2016-11-08T14:36:54.034,9151,ROBOT_Z_LOCATE_SNSR_ALWAYS_OFF_EXP_MODULE_6,,,,,,,,,,,Resolved

Cause

Z sensor is unable to detect the robot in Expansion Module 6, it is always blocked.

Solution

Replaced the Expansion Module 6 and after that the library complete the initialization with success.

References

<NOTE:1599469.1> - SL150 - How to Generate and Retrieve a Service Bundle (Health / Error Log) From the StorageTek SL150 Modular Tape Library Firmware 2.01
<NOTE:1472418.1> - SL150 - How To Remove/Replace a Base Module Chassis CRU In the StorageTek SL150 Modular Tape Library [VCAP]

Attachments

This solution has no attachment