SL8500 - DC Power Supplies 19,20,21,22 Are Not Working After Initial Installation

Asset ID:	1-72-2203249.1
Update Date:	2017-11-14
Keywords:

Solution Type Problem Resolution Sure

Solution 2203249.1 : SL8500 - DC Power Supplies 19,20,21,22 Are Not Working After Initial Installation

Related Items


Sun StorageTek SL8500 Modular Library System

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library

In this Document

Symptoms

Changes

Cause

Solution

References

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for Service Personnel
Created from <SR 3-13544472221>

Applies to:

Sun StorageTek SL8500 Modular Library System - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

SL8500 DC power supplies 19,20,21,22 are not working after initial installation. DC power supplies 23 and 24 are working properly.

Changes

Initial installation.

Cause

Cable J610-J320 between lower and upper modules is not properly seated.

Solution

Secured connector J610 and J320.

KB SL85000 - Common Build Issues (Doc ID 2111622.1) mentions:

"AC2 Rail power supplies in top slots 23-24 have green lights blinking, not fully enabled – Check short HBF1 to HBF2 interconnect cable J320 to J610"

Additional problem symptom is disabled power supplies 19,20,21 and 22.

References

<NOTE:2111622.1> - SL8500 - Common Build Issues

Attachments

This solution has no attachment