| Asset ID: |
1-72-2032963.1 |
| Update Date: | 2017-08-16 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
2032963.1
:
SL8500 - CAP Will Not Initialize
| Related Items |
- Sun StorageTek SL8500 Modular Library System
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
|
In this Document
Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for Service Personnel
Applies to:
Sun StorageTek SL8500 Modular Library System - Version All Versions and later
Information in this document applies to any platform.
Symptoms
SL8500 - CAP Will Not Initialize - This issue is common to both CAPs but is more common on the "B" CAP.
Cause
Process issue.
Solution
Installing a CAP on the "B" side requires you to reposition the mounting plate and add the rotational stop. When doing this you may remove the CAP locking motor and leave it in the up (unlocked) position. Failure to re-install the locking motor in the down (locked) position results in a CAP that will not initialize. In addition, reinstalling the locking motor without engaging the locking hole in the CAP first can cause a minor misalignment that will result in intermittent CAP failures. Make sure the CAP is locked before attempting to initialize it.
Attachments
This solution has no attachment
