Asset ID:	1-72-2014094.1
Update Date:	2017-12-28
Keywords:

---

Solution Type  Problem Resolution Sure

Solution  2014094.1 :   SL150 - Tape Library Is Showing Robot Failure Error  

In this Document

Symptoms

Cause

Solution

Applies to:

References

---

Created from <SR 3-10614118952>

Applies to:

StorageTek SL150 Modular Tape Library - Version All Versions and later
Information in this document applies to any platform.

Symptoms

Tape Library Is Showing Robot Failure Error.

Equipment Inoperable State, Fault Code 9104, 9114

Cause

The problem was a bent retaining clip on the base module such that the robot could not pass to inventory the Drive Expansion Module.

Some mis-allignment on the base module we had to replace it entirely.
.

Solution

Replaced the base module.

Applies to:

References

<NOTE:1917365.1> - SL150 - Error Message / Module Count is Greater than Z Range for Modules Calculation: MCI ModCnt
<NOTE:1285688.1> - How to Order Parts Using the 'No Parts Process', NOPRT
<NOTE:1929585.1> - SL150 - Equipment Inoperable State, Fault Code 9104, 9114
<NOTE:1910640.1> - SL150 - New Installation, Robot Initialization Failure Code 9109
<NOTE:1473774.1> - SL150 - How to Remove/Replace the Robot CRU in a StorageTek SL150 Modular Tape Library:ATR:1473774.1:0

Attachments

This solution has no attachment