showgwports shows 0A-ETH port in reset state

Asset ID:	1-72-1983812.1
Update Date:	2016-05-31
Keywords:

Solution Type Problem Resolution Sure

Solution 1983812.1 : showgwports shows 0A-ETH port in reset state

Applies to:

Exalogic Elastic Cloud X4-2 Hardware - Version X4 and later
Oracle Exalogic Elastic Cloud X2-2 Hardware - Version X2 and later
Information in this document applies to any platform.

Symptoms

ibgwswx#showgwports

Port Bridge Adminstate Link State MTU TxPause RxPause
-------------------------------------------------------------------------
0A-ETH-1 Bridge-0-2 Enabled Up Up 9600 Global Global
0A-ETH-2 Bridge-0-2 Enabled Up Reset 9600 Global Global <<<<<<<<<

Cause

In this case a vlan has not been created on 0A-ETH-2

Solution

This state will change from Reset to Up when a VLAN is created for the connector 0A-ETH-2 .

In this case if using vlan 12 and default partition the CLI command would be:

ibgwswx#createvlan 0A-ETH-2 -vlan 12 -pkey default

For Exalogic virtual, all changes should be made using Ops Centre and not the switch CLI

bgwswx#showgwports

Attachments

This solution has no attachment