SL150 - Library Does Not Power On

Asset ID:	1-72-1948293.1
Update Date:	2017-07-06
Keywords:

Solution Type Problem Resolution Sure

Solution 1948293.1 : SL150 - Library Does Not Power On

Related Items


StorageTek SL150 Modular Tape Library

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL150 Library

At installation library was found to be dead with slow flashing LED on both power supplies in base and no light on the power button.

In this Document

Symptoms

Changes

Cause

Solution

References

Created from <SR 3-9876963941>

Applies to:

StorageTek SL150 Modular Tape Library - Version All Versions and later
Information in this document applies to any platform.
SL150
2.25

Symptoms

Library uncommunicative. Nothing on the screen. Power button is not lit. No reaction to power on reset other than slow flashing on LEDs on PSUs in base.

Factory reset obviously was not an option as there was no power.

Changes

New installation.

Cause

Failed robot module

Solution

The PSUs were replaced and the front panel (as there was seemingly no power to the power on button) but this did not work.

Reseated all modules to no avail.

Replaced robot module and the PSUs flashed twice and the library came up normally.

References

<NOTE:1473799.1> - SL150 - How to do a Factory Reset on the StorageTek SL150 Modular Tape Library
<NOTE:1517227.1> - SL150 - Library Does Not Power On After Replacement of Robotic Module
<NOTE:1559312.1> - SL150 - How to Power Library On/Off

Attachments

This solution has no attachment