| Asset ID: |
1-72-1937663.1 |
| Update Date: | 2017-08-07 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
1937663.1
:
SL3000 - ACSLS Hanging After Library Reconfiguration
| Related Items |
- Sun StorageTek SL3000 Modular Library System
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
|
In this Document
Applies to:
Sun StorageTek SL3000 Modular Library System - Version All Versions and later
Information in this document applies to any platform.
There has been 2 recent events after upgrading or relocating SL3000s that involved ACSLS support over many hours to resolve. It required dropping of database tables, rebuilding the database and then running an acsss_config in addition to multiple reboots and ACSLS shutdowns and restarts.
Symptoms
ACSLS Hanging After Library Reconfiguration
Changes
Upgraded or Relocated SL3000.
Cause
The source of the problem was the presence of data cartridges in reserved or inactive cells when ACSLS was started.
Solution
Make sure that when bulk loading the library that the customer is aware of the cells that are not available.
These cells are:
- the first column (front & back) to the far left if no AEM or PEM is present.
- the 3 columns (front & back) to the far left and the far right if PEMs are present.
- the CAPs.
- the last 4 rows at the bottom of the DEM and BASE.
- any unlicensed cell.
Attachments
This solution has no attachment
