Oracle Communications EAGLE (Hardware)
 

PLA-Support>Sun Systems>CommsGBU>Global Signaling Solutions>SN-SND: Tekelec OS EPAP ECAP
 

In this Document

Symptoms

Cause

Solution

Created from <SR 3-9529703351>

Applies to:

Symptoms

Eagle at Release 45.0.X does not display derived peak TPS for a card running IPSG application.

Cause

The Eagle did not have E5-ENET-B IPSG High Throughput feature enabled and turned on.
 
The rept-stat-iptps command reports on IPSG and IPGWx linkset IP TPS. The report includes the following information for the system and for each IPSG or IPGWx linkset:

• Configured IP TPS alarm threshold
• Configured IP TPS
• Current IP TPS transmit and receive usage for 15 seconds
• Peak IP TPS transmit and receive usage and timestamp for all 15 second periods since last reset
As of Release 44.0, the rept-stat-iptps command is enhanced to report derived IP TPS usage for IPSG linksets.

• Current derived IP TPS transmit and receive usage over a window of 15 seconds
• Peak IP TPS transmit and receive usage and timestamp for all 15 second periods since last reset
• 60 seconds history of the IP TPS transmit and receive usage

The derived IP TPS is calculated by adding the costs for factors such as average MSU size, association round trip time, number of provisioned links on card and protocol used (M2PA or M3UA). The derived TPS has valid values if:

• The specified card location indicates an E5-ENET-B IPSG card or the links in the specified linkset are hosted on E5-ENET-B card,
• the E5-ENET-B IPSG High Throughput feature is turned ON,
• the actual traffic rate running on the ISPG card > 6500 TPS and the network configuration or traffic characteristics exceeds optimal configuration limits.

For all other conditions, including the use of an E5-ENET card instead of an E5-ENET-B card, the derived IP TPS values is invalid and is denoted by dashes (---) in the Derived TPS and column.
 

Solution

PR 211888 R 44.0 for this issue and the details are as below,

We observed three issues :
1. rept-stat-iptps:tpscost=yes with card/lsn shows derived peak tps for ENET-A card/links provisioned on ENET-A card also.
2. rept-stat-iptps:tpscost=yes with card/lsn shows derived peak tps even when IPSG high throughput feature is OFF.
3. Sometimes it shows a value even less than the actual TPS in derived peak tps column.
4. Sometimes, even if the derived peak TPS is zero, it is showing value in peak timestamp. The peak timestamp should be displayed as all zeros [00-00-00 00:00:00] in this case.

Logs (For ENET-A card):

> rept-stat-iptps:loc=1201:tpscost=yes

Command Accepted - Processing

  tekelecstp 02-01-04 23:46:10 MST UNKNOWN ??.?.?-64.24.0
  rept-stat-iptps:loc=1201:tpscost=yes
  Command entered at terminal #2.

  tekelecstp 02-01-04 23:46:10 MST UNKNOWN ??.?.?-64.24.0
  IP TPS USAGE REPORT

  ACTUAL DERIVED DERIVED PEAK PEAKTIMESTAMP
  TPS TPS TPS
  --------------------------------------------------------------------------
  LOC
  1201 TX: 6499 --- 6406 02-01-04 23:43:21
  RCV: 0 --- 9606 02-01-04 22:57:51
  --------------------------------------------------------------------------
  LSN LINK
  ls112 A2 TX: 6499 --- 6406 02-01-04 23:43:21
  RCV: 0 --- 9606 02-01-04 22:57:51
  --------------------------------------------------------------------------

  Command Completed.
;

> rept-stat-card:loc=1201

Command Accepted - Processing
  tekelecstp 02-01-05 05:28:39 MST UNKNOWN ??.?.?-64.24.0
  rept-stat-card:loc=1201
  Command entered at terminal #2.

  tekelecstp 02-01-05 05:28:39 MST UNKNOWN ??.?.?-64.24.0
  CARD VERSION TYPE GPL PST SST AST
  1201 008-026-003 E5ENET IPSG IS-NR Active -----
  ALARM STATUS = * 0022 Clock B for card failed, Clock A normal
  BLIXP GPL version = 134-023-000
  IMT BUS A = Disc
  IMT BUS B = Conn
  CURRENT TEMPERATURE = 42C (108F)
  PEAK TEMPERATURE: = 46C (115F) [02-01-05 04:03]
  SIGNALING LINK STATUS
  SLK PST LS CLLI
  A2 IS-NR ls112 -----------

  Command Completed.
;

Logs (For ENET-B card and IPSG High throughput feature is OFF) :

> rept-stat-card:loc=1111

Command Accepted - Processing

  tekelecstp 02-01-05 05:29:24 MST UNKNOWN ??.?.?-64.24.0
  rept-stat-card:loc=1111
  Command entered at terminal #2.
;

  tekelecstp 02-01-05 05:29:24 MST UNKNOWN ??.?.?-64.24.0
  CARD VERSION TYPE GPL PST SST AST
  1111 008-026-003 E5ENETB IPSG IS-NR Active -----
  ALARM STATUS = * 0022 Clock B for card failed, Clock A normal
  BLMCAP GPL version = 134-024-000
  IMT BUS A = Disc
  IMT BUS B = Conn
  CURRENT TEMPERATURE = 67C (153F)
  PEAK TEMPERATURE: = 68C (155F) [02-01-05 05:09]
  SIGNALING LINK STATUS
  SLK PST LS CLLI
  A OOS-MT ls11 -----------
  A1 IS-NR lsrev -----------
  A2 IS-NR ls113 -----------
  A3 OOS-MT-DSBLD ls11 -----------
  A4 OOS-MT ls11 -----------
  A5 OOS-MT ls11 -----------

  Command Completed.
;

> rept-stat-iptps:loc=1111:tpscost=yes

Command Accepted - Processing

  tekelecstp 02-01-05 05:30:42 MST UNKNOWN ??.?.?-64.24.0
  rept-stat-iptps:loc=1111:tpscost=yes
  Command entered at terminal #2.
;

  tekelecstp 02-01-05 05:30:42 MST UNKNOWN ??.?.?-64.24.0
  IP TPS USAGE REPORT

  ACTUAL DERIVED DERIVED PEAK PEAKTIMESTAMP
  TPS TPS TPS
  --------------------------------------------------------------------------
  LOC
  1111 TX: 0 --- --- 00-00-00 00:00:00
  RCV: 6543 --- 6506 02-01-05 05:30:21
  --------------------------------------------------------------------------
  LSN LINK
  ls11 A TX: 0 --- --- 00-00-00 00:00:00
  RCV: 0 --- --- 00-00-00 00:00:00

  lsrev A1 TX: 0 --- --- 00-00-00 00:00:00
  RCV: 1550 --- 1532 02-01-05 05:30:21

  ls113 A2 TX: 0 --- --- 00-00-00 00:00:00
  RCV: 4992 --- 4974 02-01-05 05:30:06

  ls11 A3 TX: 0 --- --- 00-00-00 00:00:00
  RCV: 0 --- --- 00-00-00 00:00:00

  ls11 A4 TX: 0 --- --- 00-00-00 00:00:00
  RCV: 0 --- --- 00-00-00 00:00:00

  ls11 A5 TX: 0 --- --- 00-00-00 00:00:00
  RCV: 0 --- --- 00-00-00 00:00:00
  --------------------------------------------------------------------------

  Command Completed.
;

> rtrv-ctrl-feat

Command Accepted - Processing

  tekelecstp 02-01-05 05:31:04 MST UNKNOWN ??.?.?-64.24.0
  rtrv-ctrl-feat
  Command entered at terminal #2.
;

  tekelecstp 02-01-05 05:31:04 MST UNKNOWN ??.?.?-64.24.0
  The following features have been permanently enabled:

  Feature Name Partnum Status Quantity
  Telnet 893005701 on ----
  HC-MIM SLK Capacity 893012707 on 64
  EAGLE OA&M IP Security 893400001 off ----
  Large MSU for IP Sig 893018401 on ----
  ENETB IPSG High Capacity 893039501 off ----


  The following features have been temporarily enabled:

  Feature Name Partnum Status Quantity Trial Period Left
  Zero entries found.


  The following features have expired temporary keys:

  Feature Name Partnum
  Zero entries found.

;
=================================================================================================================================================

The PR 211888 is fixed in Release 45.0 and hence the output you observed in R 45.0 is correct
 

This solution has no attachment