| Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback |
| Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition | ||
|
|
||
 |
||||||||||||||||
Solution Type Problem Resolution Sure Solution 1639594.1 : Sun ZFS Storage Appliance: Message in debug.sys 'SATA passthrough command 0xa1. Please contact Oracle Service.'
In this Document
Oracle Confidential PARTNER - Available to partners (SUN). Applies to:Sun ZFS Storage 7120 - Version All Versions to All Versions [Release All Releases]Sun Storage 7210 Unified Storage System - Version All Versions to All Versions [Release All Releases] 7000 Appliance OS (Fishworks) SymptomsMessages seen in debug.sys approximately two times an hour for the SATA system drives in 7120 and 7210 systems Mar 25 07:50:36 zfsnas1 SATA passthrough command 0xa1. Please contact Oracle Service.
Mar 25 07:50:36 zfsnas1 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,340c@5/pci108e,7aaf@0 (mpt0): Mar 25 07:50:36 zfsnas1 SATA passthrough command 0xa1. Please contact Oracle Service. Mar 25 07:50:36 zfsnas1 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,340c@5/pci108e,7aaf@0 (mpt0): Mar 25 07:50:36 zfsnas1 SATA passthrough command 0xa1. Please contact Oracle Service. Mar 25 07:50:36 zfsnas1 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,340c@5/pci108e,7aaf@0 (mpt0): Mar 25 07:50:36 zfsnas1 SATA passthrough command 0xa1. Please contact Oracle Service.
CauseFor historic reasons, the disk driver was modified to not accept these commands from SATA drives, but they are still regularly generated by the drive. SolutionThere is no problem here - if the issue is limited to the SATA system disks in a 7210 or 7120 and they occur on an hourly basis.
Attachments This solution has no attachment |
||||||||||||||||
|
||||||||||||||||