VSM - SLS6662E & SLS6625E messages on 9840C Tape Drive on different tapes

Asset ID:	1-72-1635005.1
Update Date:	2018-03-06
Keywords:

Solution Type Problem Resolution Sure

Solution 1635005.1 : VSM - SLS6662E & SLS6625E messages on 9840C Tape Drive on different tapes

Applies to:

Sun StorageTek 9840C Tape Drive - Version Not Applicable and later
Sun StorageTek VSM System - Version 4 and later
Sun StorageTek VSM5 System
Information in this document applies to any platform.

Symptoms

Customer see this error message:

<SLS6662E RTD RTD15104 PUT IN MAINTENANCE MODE BECAUSE OF ERROR
<SLS6625E RTD RTD15104 REPORTED VOLUME FENCED: 104400474F98E22000001707000000000000000000000000CE0E4620093700FF
<SLS6625E RTD RTD15104 REPORTED READ DATA CHK: 0A4420234F98E22001003CA035E5000035F0000000000000CE0E4620093700FF

Cause

You find the FSC 9840C error message here (byte 11 and 12):

<SLS6625E RTD RTD15104 REPORTED VOLUME FENCED: 104400474F98E22000001707000000000000000000000000CE0E4620093700FF

This error message 1707 say:

FSC Dictionary Description:
MODEL = 9840C
FSC = 1707
(FSC Match Found in Rev. 1.46)

FSC: 1707 ASC_FSC_PERM_WRT_INIT_SEL
MIM Code: NONE
FRU: STATUS ONLY CONF: 100%

Summary: |DATA IN BUFFER |AFTER PERMANENT |WRITE ERROR |
Field Text:
Write data in the buffer exists and a permanent write error was detected. This FSC is set for all commands that test if write data in the buffer exists and then do a force write data to tape if no permanent error was present.

Solution

If the customer has this message on different tapes, replace this Tape Drive.

Attachments

This solution has no attachment