T10000C - Problems Addressed In 1.57.311 Code

Asset ID:	1-72-1617047.1
Update Date:	2017-06-26
Keywords:

Solution Type Problem Resolution Sure

Solution 1617047.1 : T10000C - Problems Addressed In 1.57.311 Code

Applies to:

StorageTek T10000C Tape Drive - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Symptoms

3660
FIX for SNO 3660 failure to reconstitute data from sparse wrap. Replaces special build RB57.308
Fixes a customer reported problem where Invalid MIR Tape Alert flag will cause VSM to not use the customer’s tapes. Replaces special build RA57308

37A0
Fix for SNO 37A0 (RO_FSC_NO_TARGET_REACHED_TYPE) during a read operation

Fixes a bug where T10KC drives were not previously reporting any servo diag wake-up errors. Note: Errors were being logged in the eventlog files but not displayed by VOP.

RFE from a customer requesting T10KC supporting up to “512” active hosts (increase from previous maximum “256”).

RFE from customer requesting DIVA (Front Porch) performance improvement when positioning to EOD using a space command when last position of the drive already was at EOD. Change eliminates a reconstitute of FSA sparse-wrap data which could take up to 34 seconds before this change.

Cause

Problems addressed in 1.57.311 code.

Solution

Install1.57.311 code to address above problems.

Attachments

This solution has no attachment