| Asset ID: |
1-72-1587378.1 |
| Update Date: | 2017-09-26 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
1587378.1
:
SL150 - Library Going Offline After Performing Media Movement Through Browser Interface(GUI)
| Related Items |
- StorageTek SL150 Modular Tape Library
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL150 Library
|
In this Document
Created from <SR 3-7765444561>
Applies to:
StorageTek SL150 Modular Tape Library - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Symptoms
SL150 Library going offline after performing media movement through the Browser Interface(GUI).
Cause
The "Check-box" to make the library back online is not selected in the procedure steps.
Solution
1. Log into the SL150 as an administrator or operator.
2. Select the Library screen from the screens menu on the left side of the interface.
3. In the graphical library map, click on one of the cartridges that you need to move.
4. When the context menu appears, select Move Tape. The Move Tape panel appears at the top of the screen. In the Source field, the address of the cartridge that you chose appears.
5. In the graphical library map, click on the desired destination cartridge slot (it must be empty). In the Destination controls on the Move Tape panel, the address of the cartridge slot that you chose appears.
6. In the Move Tape panel, ensure check-box is selected to set the library back online after applying this action.
7. In the Move Tape panel, press the OK button to perform the move or Cancel to abort.
8. When the Move Tape panel shows that the move is complete, press the OK button to close the panel.
The tape will be moved to the selected destination and library will come back online automatically.
Attachments
This solution has no attachment
