SPARC T5-2 systems could see "WARNING: " messages on console after executing "setenv" at the "ok>" with system firmware 9.0.0.h

Asset ID:	1-72-1568737.1
Update Date:	2017-11-15
Keywords:

Solution Type Problem Resolution Sure

Solution 1568737.1 : SPARC T5-2 systems could see "WARNING: " messages on console after executing "setenv" at the "ok>" with system firmware 9.0.0.h

Applies to:

SPARC T5-2 - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

Getting following "Warning" messages on console when using the "setenv" (ie. ok> setenv boot-device disk0 disk1) command with system firmware 9.0.0.h :

WARNING: Waiting for DS registration response but LDC is Not Up!
WARNING: Waiting for DS registration response but LDC is Not Up!
WARNING: Configuration variable setting will not persist after a reset or power cycle
WARNING: Configuration variable setting will not persist after a reset or power cycle

Cause

System Firmware 9.0.0.h

Solution

System Firmware 9.0.0.i

Attachments

This solution has no attachment