| Asset ID: |
1-72-1527872.1 |
| Update Date: | 2017-07-25 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
1527872.1
:
Fabric Interconnect Software Allowed "Allowed VLAN" range setting for (Xsigo) "access-mode" vNICs
| Related Items |
- Oracle Fabric Interconnect F1-15
- Oracle Fabric Interconnect F1-4
|
| Related Categories |
- PLA-Support>Sun Systems>SAND>Network>SN-SND: Oracle Virtual Networking
|
In this Document
Applies to:
Oracle Fabric Interconnect F1-15 - Version All Versions to All Versions [Release All Releases]
Oracle Fabric Interconnect F1-4 - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Symptoms
"allowed VLAN range" on "access-mode" vnics is not working.
Changes
Created "access-mode" vnics and configuring them with "allowed VLAN range".
Cause
An XgOS software problem caused the "allowed VLAN range" to be configurable on "access-mode" vnics. The XgOS does not prevent this misconfiguration.
Solution
Notes for using the allowed VLAN range setting for vNICs
The allowed VLAN range feature is supported on a trunk-mode vNIC or I/O port that is to specify the VLANs that are valid on that vNIC or port. This feature is not applicable to access-mode VLANs. However, a software problem causes the allowed VLAN range feature to be configurable on access-mode VLANs. The XgOS does not prevent this misconfiguration.
When configuring the allowed VLAN range feature, make sure to do so only on trunk-mode vNICs or ports.
Attachments
This solution has no attachment
