T10000A/B- Drive Fails to Come Up After It Is Power Cycled

Asset ID:	1-72-1462464.1
Update Date:	2018-03-19
Keywords:

Solution Type Problem Resolution Sure

Solution 1462464.1 : T10000A/B- Drive Fails to Come Up After It Is Power Cycled

Applies to:

Sun StorageTek T10000A Tape Drive - Version All Versions to All Versions [Release All Releases]
Sun StorageTek T10000B Tape Drive - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

Later build T10000A and all T10000B drives have the potential to fail to come up after they are power cycled with one of the following symptoms:

1) Boot Monitor

2) 6046 SNO

3) The drive does not IPL. (possibly with a solid red status LED)

4) FE01 SNO

FSCFE01

FSC6046

Error 6046

Will not initialize

013E SNO error and the drive will not come back from a power cycle.

The drive will fail no matter what library slot location it is installed in.

Changes

The T10KA/B drive was power cycled.

Cause

A chip has probably failed within the drive preventing it from running the bring up tests so that it will complete an IPL.

Solution

The drive must be replaced and sent back through the normal returns process.

Attachments

This solution has no attachment