| Asset ID: |
1-72-1333021.1 |
| Update Date: | 2017-05-22 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
1333021.1
:
SL3000 - Manual Clean of Drive Not Incrementing Use Count
| Related Items |
- Sun StorageTek SL3000 Modular Library System
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
|
In this Document
Applies to:
Sun StorageTek SL3000 Modular Library System - Version Not Applicable and later
Information in this document applies to any platform.
Symptoms
Manual Clean not Incrementing Use Count
Cause
Unlike the SL500, the SL3000 does not have a Manual Cleaning option in the SLConsole when using AutoClean.
Solution
Manual cleans can only be accomplished by using a Diagnostic Move command from the SLConsole. When using a cleaning tape in this manual manner, the "use count" of the cleaning tape will not increment. This is known behavior and there is no current plan to modify it.
NOTE: Manual cleaning will have no effect on many drives if the transport is not in a "clean requested" state. In addition, routine manual cleans can have detrimental effects such as decreased head life. Engineering recommends that cleaning should be done only when a transports requests a clean.
Attachments
This solution has no attachment
