| Asset ID: |
1-72-1013172.1 |
| Update Date: | 2012-10-26 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
1013172.1
:
Brocade - How to Configure Fabric Watch to Send E-Mail Notifications
| Related Items |
- Brocade 3800 Fabric Switch
- Brocade 48000 Director
|
| Related Categories |
- PLA-Support>Sun Systems>DISK>Switch>SN-DK: Brocade Switch
- _Old GCS Categories>Sun Microsystems>Switches>Brocade
|
PreviouslyPublishedAs
218169
Applies to:
Brocade 3800 Fabric Switch - Version Not Applicable and later
Brocade 48000 Director - Version Not Applicable and later
All Platforms
Symptoms
How to configure Fabric Watch to send e-mail notifications
Changes
N/A
Cause
N/A
Solution
Resolution
1. Telnet to the switch as admin
2. Use the fwMailCfg command from the command line.
Example:Switch:admin>fwmailcfg
3. Select an item =>:(1..6)
1:Show Mail Configuration Information
2:Disable Email Alert
3:Enable Email Alert
4:Send Test Mail
5:Set Mail Address for Email Alert
6:Quit
Note: For FOS rev 6.x, "Relay Host IP Configuration" option is displayed in the above
selection.
Select the "Enable Email Alert", and select the component that you want to be enabled. Then
select the "Mail Address for Email Alert" and follow the required steps.
Product
Brocade
Brocade, 200e, 3900, 12000, 3800, 4900, 5000, 48000, DCX Fibre channel switch, OS V3.0.2, OS V3.0.2C, OS V4.0.0, OS V4.0.2, OS 5.x, OS 6.x
Previously Published As
STKKB6666
Attachments
This solution has no attachment
