Sun Enterprise[TM] 10000: DR operation error: "Can't clnt_create: hostname: RPC: Rpcbind failure

Asset ID:	1-72-1003495.1
Update Date:	2018-01-10
Keywords:

Solution Type Problem Resolution Sure

Solution 1003495.1 : Sun Enterprise[TM] 10000: DR operation error: "Can't clnt_create: hostname: RPC: Rpcbind failure - RPC: Timed out"

Applies to:

Sun Enterprise 10000 Server - Version Not Applicable and later
All Platforms

Symptoms

An attempt to perform a Dynamic Reconfiguration (DR) operation on a Sun Enterprise[TM] 10000 domain results in the following output:

Checking environment...
Establishing Control Board Server connection...
Initializing SSP SNMP MIB...
Establishing communication with DR daemon...
Can't clnt_create: xxxxxxx: RPC: Rpcbind failure - RPC: Timed out
Error: can't communicate with DR daemon.
RPC setup failure. Check DR host daemon. Unable to continue.

Changes

Cause

The output indicates that the SSP can't communicate with the target Sun Enterprise 10000 domain.

Solution

Check /etc/hosts to ensure the IP address of the SSP and the domain are correct on both the domain and the SSP. If they are not, then this is the error condition you will see.

Additional Information
Also refer to:
Document: 1004770.1 "Sun Enterprise[TM] 10000: Error: can't communicate with DR daemon."

Keywords: e10k, 10000, dr, clnt_create, rpcbind, failure

Previously Published As 76831

Attachments

This solution has no attachment