|
Note: Modular System (chassis) specifications are documented on the chassis specification page.
Reference the Servers/Blade section of the Handbook's Systems List to find documentation on Modular Systems.
|
|
Processor |
| Number |
Two dual compute nodes. 2 CPUs/node, 8 cores/node, 16 cores/blade.
|
| Architecture |
Type:Quad-core, Intel[TM] Xeon 5500 series processors provide
Intel Quick Path Interconnect (QPI), Hyper-Threading (HT) and
Intel Turbo Boost Technology.
- Model/Speed: L5520, Quad-Core, 2.26 GHz, 60W
- Model/Speed: E5520, Quad-Core, 2.26 GHz, 80W
- Model/Speed: E5540, Quad-Core, 2.53 GHz, 80W
- Model/Speed: X5560, Quad-Core, 2.80 GHz, 95W
- Model/Speed: X5570, Quad-Core, 2.93 GHz, 95W
|
| Cache Memory |
8 MB, L3 Cache
|
Main Memory |
| Memory Type |
1333 and 1066 MHz DDR3 Registered DIMMs
|
| Capacities |
- Maximum memory: 96GB.
- Total DIMM slots: 24 (12 per node).
- DIMM sizes: 2GB, and 4GB.
|
| Sun Flash Modules |
- Optional 24GB SATA-based Sun Flash Module provide storage acceleration
and a boot source.
|
Management Environment
|
Sun Blade Server Module Service Processor (SP) |
- There are two SPs (1/node) on the SP mezzanine card.
- The SPs run Integrated Lights-Out Manager (ILOM).
- The SP card provides dedicated Management 10/100 Management Ethernet Port.
- ILOM on the SP card can be accessed via a Dongle cable assembly's connection to the Universal Connector Port (UCP) on the front of the Sun Blade X6275. The Sun Blade X6275 server module support the (3-port) dongle cable (X-Option part number X4622A).
- The SP card and ILOM provide the following:
- A Browser User Interface for control of the system through a graphical interface.
- Remote media management over ip with full Keyboard, Video, Mouse, and Storage (KVMS) redirection.
- DMTF style CLI.
- IPMI 2.0 compliance for management and control.
- Compatibility for third-party SNMP system managers with requirements for SNMP (v1, v2C, v3).
- Monitor and report system and component status on all Field Replaceable Units (FRUs).
|
|
Standard Integrated Interfaces |
|
Universal Connector Port (UCP)
|
There are two UCPs on the Sun Blade X6275 - 1/node. Available via the Dongle Cable Assembly (Option X4622A/3 cable) connection to the UCP, each UCP provides:
- 2 USB 2.0 ports.
- VGA graphics (DB-15 connector)
- RJ-45 serial port for ILOM console.
|
| Network Management |
- One 10/100Base-T Ethernet connection per node.
|
| Ethernet |
- One 10/100/1000Base-T Ethernet port per node.
|
| Midplane I/O per compute node |
- One (x8) PCI Express Gen 2 bus to the PCI ExpressModule (EM) slot.
- One 10/100/1000Base-T Ethernet Interface using Intel 82567 GbE controller, interface to one NEM.
- 10/100 Ethernet management port to the Chassis Monitoring Module (CMM). (Note:Shared between 2 compute nodes via on-board switch).
|
| PCI Interfaces with the Sun Blade Modular System (chassis) |
- The Sun Blade X6275 has two PCI Express Gen 2 interfaces per server module (one per compute node), via passive mid-plane.
- I/O is offered in two form factors:
- PCI Express ExpressModules (EM)
and
- PCI Express Network Express Modules (NEM).
- Each Sun Blade X6275 has four, PCI Express links allocated to:
- Each NEM has one link assigned to each server module. All server modules
share the NEM. For example, Blade 0 has access to NEM 0/slot 0,
and NEM 1/slot 0. Blade 1 to NEM 0/slot 1 and NEM 1/slot 1, etc.
- EM slots are not shared between server modules. Each EM slot is
specific to one server module.
|
| Regulations
|
| Dimensions
and Weights |
| Height |
44.0 mm (1.7 in). |
| Width |
327.0 mm (12.87 in). |
| Depth |
512.0 mm (20.16 in). |
| Weight (fully configured) |
20.61 lbs. |
