| Interfaces |
|
Up to 15 I/O Modules
- 10 Gigabit Ethernet Module
- 10-Port Gigabit Ethernet Module
- 4-Port Gigabit Ethernet Module
- 2×8 Line-Rate Fibre Channel Module
|
- 1 port, full duplex 10Gbps
- 10 individual ports, full duplex 1Gbps
- 4 independent ports, full duplex 10Gbps
- 2 ports, aggregate line rate 16Gbps full duplex
|
| Server Connectivity |
24-Port Infiniband Fabric Board |
| Infiniband (IB) connections of Double Data Rate (DDR)
are supported through an Infiniband Fabric Board that has 24 individual
server ports. The IB connections are at 20Gbps (DDR) based on the
speeds supported in your network. |
| Infiniband (IB) connections of Quadruple Data Rate (QDR)
are supported through an Infiniband Fabric Board that has 20 individual
server ports. The IB connections are at 20Gbps (DDR) or 40Gbps (QDR)
based on the speeds supported in your network. |
|
|
| Each power supply should be connected
to a separate 15-20A AC branch circuit. Do not exceed maximum power
cord length of 4.57m (15 ft). |
| AC Power |
100-127 / 200-240 VAC
12A @ 100V or 7.68A @ 180V
47-63 Hz
1220 W (max) with chassis fully loaded |
| Temperature |
Operating: 0 -
40 C |
| Relative Humidity |
Operating: 10%
to 80% @ 40 C (non-condensing) |
| Altitude |
Operating: 2000m
(max) |
| Acoustic |
System Noise: 72
decibels with all fans operating at full speed
|
|
|
| Height |
178 mm (7 in) |
| Width |
454 mm (17.81 in) |
| Depth |
718 mm (28.25 in) If
Cable Management Arm is installed, add approximately 132 mm (5.25
in) to the depth |
| Weight (maximum) |
45.36 kg (100 lb) in
shipping configuration, no I/O Modules installed.
58.97 kg (130 lb) with I/O Modules installed. The fully loaded weight
will vary depending on the number and type of Modules installed. |
|
|
See  Appendix
B of the Fabric Director Quick-Install-Guide document. |
|
|
| 4-post EIA Rack |
Clearance
and Service Access
|
| Front |
45.4 cm (17.81 in) |
| Rear |
45.4 cm (17.81 in) |
| Airflow for
cooling is from front to rear. |
