|
|
| Chassis |
- 1U, rackmount
- Front: Display, navigation buttons, reset button, alarm LED,
and alarm silence button.
- Rear: One NIU slot (signaling, media, and management interfaces)
|
| Memory |
- 16GB host memory capacity
|
| Local Storage |
- 80GB for Call Detail Record (CDR) storage, log files, and other
permanent file storage
- Optional 400GB or 480GB storage expansion module for call detail record
(CDR) backup
|
| Secure Services Module (SSM) |
- Secure services module (SSM3) – optional NIU hardware acceleration
option for TLS and IPsec session establishment with use of non-manual
keys
- Onboard dedicated encryption processor for IPsec and SRTP-encrypted
traffic
|
| Front Panel Management Interfaces |
- One RS-232 serial console interface with RJ-45 connector
- One USB 2.0 interface
- One system status display with keypad
|
Network Interface
Units (NIU)
|
| Basic Interface Unit |
- Two 10GbE Interfaces (requires SFP+ transceivers)
- Four 1GbE Interfaces (requires SFP transceivers)
- Simultaneous use of 1 GbE and 10 GbE network interfaces is not
supported
|
| Transcoding Interface Unit |
- Up to twelve on-board transcoding digital signal processor (DSP)
modules
- Supported codecs
- Wireline - G.711 10, G.711 20, G.722, G.723.1, G.726, G.729A/B,
iLBC
- Wireless – AMR-NB, AMR-WB, GSM-FR, EVRC, EVRC-B
- T.38 fax interworking
|
| Network Interface Unit Management
Interfaces - included on all NIU options |
- Two 10/100/1000 Mbps interfaces with RJ-45 for HA node configurations
- One 10/100/1000 Mbps interface with IPsec encryption processor
and RJ-45 for management networks (Optional IPsec encryption of
management interface via encryption capable NIU)
- One RS-232 serial console interface with RJ-45 connector
- One alarm port with RJ-45 connector
|
|
|
| AC Power |
- Voltage: Auto-Sensing 100 VAC to 240 VAC
- Frequency: 50/60 Hz
- Cable: 18 AWG three-wire cable, with three-lead IEC 320 receptacle
on the power supply end and a country-dependent plug on the power
source end
|
| -48 DC Power |
- Voltage: -48 VDC (+/− 10%) (maximum range: -40
DC to -72 DC)
- Cable: 10 AWG recommended minimum, with at least three conductors
rated for at least 60° C (140° F)
|
| Temperature |
Operating: +0°
C to +40° C (32° F to 104 ° F)
Nonoperating: -20° C to 65° C (-4° F to 149°
F) |
| Relative Humidity |
Operating: 10%
to 85% (non-condensing) |
| Altitude |
Required to operate below
the maximum altitude of 3048 meters (10000 ft) |
| Air Flow |
100 CFM
front to back |
| Heat Dissipation |
Typical: 682 BTU/hr
Maximum: 3796 BTU/hr |
| Power Usage |
Typical: 250W
Maximum: 350W |
|
|
| Height |
4..37 cm (1.72 in) |
| Width |
43.43 cm (17.10 in)(+
mounting ear width: 48.26 cm (19 in) |
| Depth |
50.8 cm (20 in)(+ mounting
slide bar depth) |
| Weight (maximum) |
approximately 9.3 kg (20.5
lb), fully loaded |
|
|
| Regulatory Markings |
CE, FCC, ICES-003, VCCI, NRTL TUV (US/Canada), KCC, BSMI, EAC, RCM,
BIS, ANATEL |
| Safety |
US: UL 60950-1
Canada: CSA-C22.2 No. 60950-1-07
EU: EN 60950-1 (CE Mark)
International: IEC-60950-1 |
| Electromagnetic Compatibility (EMC) |
US: FCC Part 15 (CFR 47), Class A Limits
Canada: ICES-003 Issue 4, Class A Limits
EU: EN 55022:2006 + A1:2007 Class A Limits
EN55024
EN61000-3-2
EN61000-3-3
EN300386:2010 for Telecommunications Centers and for Other Than Telecommunications
Centers |
| EMI |
47CFR15 Subpart B (FCC) Class A
IECS-003 Class A
AS/NZS CISPR22 Class A
CISPR22 Class A
EU: EN 55024 (CE Mark)
EU: EN 300386 for Telecommunications Centers and for Other Than Telecommunications
Centers
EN 55022 Class A
VCCI Class A limits
Germany: 1 TR 9 |
| NEBS |
GR-63
GR-1089
SR-3580: Level 3 Certified |
| US Department of Defense Security |
Defense Information Systems Agency (DISA) Unified Communications
Requirements (UCR) compliant
Listed: DISA Unified Capabilities Approved Product List (UCAPL) |
| Other |
NEBS Level 3
ETSI: EN 300019 Class 1.2, 2.2, 3.2
Seismic: GR-63-CORE requirements for earthquake zone 4
1 TR 9
Restriction of Hazardous Substances (RoHS) Directive and Waste Electrical
and Electronics Equipment
(WEEE) Directive |
|
|
| Ships with hardware for mounting in
2-post or 4-post 19" wide racks. Options for 23" wide racks are available
by special order. |
Clearance
and Service Access
|
| Front |
20 cm (8 in) |
| Rear |
20 cm (8 in) |
Leave enough clearance, approximately 20 cm (8 in),
behind the equipment rack
to allow access to the console connector, reset button, graphic display
buttons,
and physical interface card slots. |
