Sun Microsystems, Inc.   Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Netra SPARC T3-1 LEDs

The Netra SPARC T3-1 server provides the following LED groupings:

Front Panel LEDs Rear Panel LEDs

Netra SPARC T3-1 Front Panel LEDs



The front panel LEDs are located on the left hand side of the front panel above Fan Modules (FM0) and (FM1).
These LEDs provide a quick visual check on the state of the system.

LED Name LED color Description
Locator LED and Locator button
White Enables you to identify a particular server. The LED is controlled using one of the following methods:
  • Within the Oracle ILOM interface, set /SYS/LOCATE value=Fast_Blink
  • Press the locator button

    • This LED provides the following indications:
  • Off - Normal operating state.
  • Fast Blink - The server received a signal as a result of one of the preceding methods and is indicating here I am - and that it is operational.
    		•
    Service Action Required LED Amber The service required LED will illuminate when any of the following conditions occur:
  • A fault is detected by the system diagnostics, such as POST
  • When a FRU fails, such as a power supply
    • Power/OK LED Off The system is unavailable. System power might be off or simply disconnected.
    Green - Steady On Normal Operating State
    Green - Slow Blink Indicates that the system is in SUSPEND mode.
    Green - Fast Blink System is running in standby mode and can be quickly returned to full function.
    Power on/off Button n/a Turns the system on and off. This button is recessed to prevent accidental server power-off. There is no Power On/Off button on the rear panel.
    Alarm:Critical LED Red Indicates a critical alarm.
    Alarm:Major LED Red Indicates a major alarm.
    Alarm:Minor LED Amber Indicates a minor alarm.
    Alarm:User LED Amber Indicates a user alarm.
    Fan fault (FM 0) LED (Green - Normal) Amber - Fault condition Indicates a fan fault condition.
    Fan fault (FM 1) LED (Green - Normal) Amber - Fault condition Indicates a fan fault condition.
    Fan fault (FM 2) LED (Green - Normal) Amber - Fault condition Indicates a fan fault condition.
    Fan fault (FM 3) LED (Green - Normal) Amber - Fault condition Indicates a fan fault condition.
    Fan fault (FM 4) LED (Green - Normal) Amber - Fault condition Indicates a fan fault condition.

     

    Netra SPARC T3-1 Rear Panel LEDs

    LED Name Description
    PSU OK to Remove (Blue) A power supply can be removed safely during a hot-swap operation
    PSU AC Present (Green) The power supply is plugged in and AC power is available, regardless of the system power state
    Power Supply Service Required LED Reference Front Panel Power Supply Service Required LED listed above
    Locator LED/ Locator button Reference Front Panel Locator LED/button listed above
    Service Action Required LED Reference Front Panel Service Required LED listed above
    Power/OK LED Reference Front Panel Power OK LED listed above

     

      Copyright © 2018 Oracle and/or its affiliates.  All rights reserved.
     Feedback