System Configuration Card

Notes:

1. The System Configuration Card retains the server's MAC address, hostid, and NVRAM settings for transfer to a new motherboard or server.
2. To transfer the System Configuration Card to a new server:
   • Power down both the old and the new Netra servers.
   • Remove the front bezel from both the old and the new servers.
   • Remove the System Configuration Card from the old server and insert it into the new one.
   • Replace the front bezel on the new server. You can secure the new System Configuration Card by fixing a tie-wrap through the hole in the front mounting of the memory card reader.

References

1. Netra T1 Server User's Guide, 806-5978.
2. Sun Fire V100 Server Documentation.
3. Netra 120 Server Documentation.
4. Sun Fire V120 Server Documentation.
5. System Configuration Card Information Sheet, 816-0405.